Know The Situations In Which You Can Use The Right Kind Of Saw

When it comes to woodwork, the most common item that we use is a Saw. However,  more often than not, the end result is not pretty.  We end up struggling with the saw  and sometimes end up with minor bruises and in  a worst case scenario, end up damaging the wood irrevocably. More often than not , people ask the question – There is only one type of saw right? Well  the answer is an emphatic No.  You see this type of product falls under two categories – The first one is the table based product and the second one is the panel based product.

Let us start by understanding the differences. To start with the table based product is smaller when compared to the panel based product.  The table saw is much easier to move around and requires a frame with four legs for its portability. In contrast the panel based saw is much larger and bulkier.  The table saw can be used for fast cutting and crafting small items.  Since the saw in placed in the middle, it makes it easier to handle.

However, this does not mean that the panel saw is inferior. As stated, it depends on the situation. The panel saw requires to be placed in a framework that is stationary and hence is not mobile. However, what it lacks in this aspect, it makes up in power.  This type of saw is the most powerful one that can be used  by you. It can move in both the horizontal and vertical manner as well as cut sheets as large as 5*8 feet. However, you need to understand that it takes a lot more elbow grease in comparison to  the smaller table saw to operate.

So the next question  is which is a better option for cabinets and work to be done at home? Well again, it depends on the type of work required.  If you need a saw to measure and cut out pieces that measure around two to three feet, then you need to use the table saw. However, if you are building furniture for your man-cave and  are looking to make pieces that need large cuts in pre-decided shapes, then the panel saw should be preferred.

Each of these products has their pros and cons. Let's begin with the table saw. To start with, this  is the cheaper of the two.  The reason is because this product has  a limited use.  It comes with a  blade that is only covered partly.  This causes a slight problem as the wood has to be pushed by hand , which may lead to cuts and injured fingers.  As stated, you need to use this sparingly as big projects cannot be executed with the same.

 If we take a look at the panel saw the first thing that comes to mind is the safety aspect. Unlike the previous product, the blade here is fully covered. These products are known for their safety as you will find brands like the Altendorf Panel Saw being used  a lot in industrial functions. This is the reason that they range in the upper end when it comes to cost. However, you can only move in straight lines with this product. This means that if you need to create decorative pieces, then this is not the product for you.  You can churn out a large number of square and rectangular shaped pieces with ease.The biggest benefit for any person using the panel saw is that the speed of work is consistent irrespective of the size of the piece.

Caple Traders is one of the leading supplier of India’s Best Selling CNC Woodworking Machines and Altendorf Panel Saw.

Working of a Powered Engine or a Generator

Fuel is required in many different industries. Most of the factories run their machines by using fuel. This has increased the demand for fuel and other gases world over. However many major economies today are facing a shortage of fuel. The prices for fuels like petrol and gasoline are skyrocketing. However the invention of powered engine or a generator has highly fulfilled this cost effective need of many consumers. 

Not only is the powered engine moderately priced but it is also efficient. A powered engine gives more output of energy than that of an engine powered withgasoline. The reason for this is the higher energy density of a generator as compared to the same amount of gasoline. Therefore these engines are mostly used in heavy vehicle industries and many other automobiles to give higher mileage. Diesel Gensets Mumbai has a higher boiling point compared to that of water and it is also oilier than gasoline. Therefore minimum amount of it gives maximum energy. If you are still confused about how a power engine is better than a gasoline one, keep reading further to explore the working of a powered engine. 

The major difference between a powered engine and a gasoline engine is that of ignition. A gasoline engine operates on spark ignition, whereas in a powered engine compression is used to ignite the fuel. In the latter, air passes through the engine where it is exposed to high compression. This higher compression heats the engine. The higher temperature achieved in this type of engine is higher than that of a gasoline one. The fuel then ignites in the engine with help of the high temperature. This type of engine requires air and fuel to be infused into the engine at different intervals. This is one drawback of a fuel powered engine. In a gasoline engine air and gas are simply mixed together, but this cannot be achieved in case of fuel and air. Therefore both have to be introduced at different stages. To induce fuel inside the engine an injector is used. In a gasoline engine air and fuel are mixed and this reduces the compression, however in a fuel engine only air is compressed. A fuel engine compresses air at a higher ratio than that of a gasoline engine. The ratio so achieved is approximately 14:1 to 25:1. 

Once the compression is done, the combusted by products are expelled from the engine. The by- products areremoved through the exhaust. During winters to provide extra heat to this engine, glow plugs are used.

A powered engine is of two cycles and four cycles. Depending on your application you can choose the engine. A powered engine is also known as electric generator sets. Today they are widely used across various industries and commercial organizations.These engines have the capability to serve the small loads for houses and small residential buildings as well as higher loads like factories, industrial plants,hospitals and largecorporate houses. In many establishments these engines serve as a major source of power. They can also act as back up source of power in certain areas. A powered engine is available in different sizes. They also come in different specifications. Generators that range between 5 to 30 Kilo watts are usually used for smaller residential applications. For industrial establishment 30 Kilo watts to 6 Megawatts is used. Single phase power generators are best for home use or for small offices. A three phase generator is applicable mostly for areas that cover a wider spectrum, basically industrial plants or factories.

A detailed description about the Robland Panel Saw

Panel saws have been one of the most important inventions in the wood work industry. Robland and Altendorf are two of the major panel saw manufacturing brands in the sawing machines. Panel saws are famous because it gives more accuracy, better results and much higher amount of production rate and yield. This is what makes the panel saw so versatile and essential for all the major wood work industries in the world. Panel saws made from Robland have also gained a good amount of popularity and prominence because of its design and features which is largely based on its efficiency and ability to deliver high results on a regular basis.

When you are in the market looking for sawing machinery then Altendorf and Robland are two names that you will come across. Robland saws are quite popular because they are easy to install, maintain and does not need a high level of expertise for the operation. Since the company being founded in Belgium in the year 1972, Robland has delivered and manufactured a large number of machineries that have made the wood work industry to flourish. They are famous for the innovation and constantly evolving need for developing new products. 

The primary features of a Robland Panel Saw are that it is easy to use and operate and does not need a lot of human effort. The powerful motor is mounted on the machine. Initially the wooden log had to be fed into the saw but here with the help of a sliding table, the wooden log is able to take the load such that the log is gradually fed into the machine. It has a precise external scorer and a high precision slider. The equipment also comes with a digital display that gives all the details regarding the design that has to be done and the size based on which the wood has to be cut down. The cross cut table support along with plate steel frame and heavy clamp makes it a sure choice for all the wood work industries where cutting is a primary operation.

The panel saw comes with a sliding table that has as many as 8 hardened rods inserted to aluminum extrusions. There are roller bearings and ball bearings that keep the system free from any kind of friction, wear and tear.  The saw unit is adjustable such that the angles can be adjusted to either 45 or 90 degrees based on the usage and the load. The rise and fall of the saw is usually carried out with the help of a hand wheel so that the controls can be done efficiently. There are also mitre fence, cross cut fence and parallel fences. 

It is extremely easy to implement and use the panel saw and install it anywhere. It hardly takes up any space given the fact that huge wooden logs will be loaded into it. A computer can also be connected to the controls that will help in getting the perfect dimensions that is needed to do the work perfectly. There is no noise or vibrations during the operations and it is also able to take a good amount of load without causing any break away issues. You may need a skilled person to handle the controls and apart from that there is no need for people to load or unload the wood and other materials that may be loaded into it. The Robland saw is one of the finest machinery that enables you to get the right amount of precise dimensions without any issues with the size.

Edgebanding Machines: Types That Are Available.

The wood work industry is a challenging one since it requires precision and there is a plethora of chances that things may go wrong. Even the most of the experienced carpenters and craftsmen have a difficult time building the product as per the client’s specifications. There have been many a cases when the desired product has gone wrong leading to loss of time and money. Therefore, it is necessary that the carpenters are always particular about keeping a tab of the way the work is being done.

However, expecting that the woodwork should be done smoothly without any problem is a bit too much. Given the fact that humans are prone to committing an error, there is no way you can ensure that you can get a perfect wood work done on your work piece. In a similar way, the process of edge banding, which is a very crucial part of any wood work and requires exceptional accuracy, cannot be achieved with just human application. The edgebandingmachines working behind them have to be perfect and well built. 

If you are a woodworking service, then it is very much required that you should have the knowledge about all the components and types of these machines. Though they are available in various types, we can take the pain to introduce ourselves to at least some main types that can work out to be the finest in woodworking.

·   Automatic Edge Banders: As the name suggests these machines are completely automatic in their functioning. Given that there is no need for any kind of manual effort here, the machines are convenient to use and don’t take as much time as the manual ones. The good news is that today you can find machines that are manufactured by those companies which can be fitted and used even in smaller workshops. These machines are also equipped with tape feeders and trimming tools that can help you in changing the tape size. You can choose any of the edgebanding machines that can edge the tapes from 0.4mm to 3mm.

·   Portable Edge Banders: This is an example of convenient machinery being employed in the woodworking industry. As the name suggests portable edge banders can be sued as per your space related convenience and don’t pose any problem while using. These edge banders are portable, so you can carry them in your hands and orient their positions according to your choice and movement. Also, you can carry them anywhere as you would like. Portable edge banders are known to be an ideal machinery for workshops with smaller spaces.

·   Accessories: You may think that accessories are not that important to be known, but in fact, you should have knowledge about the accessories so that in case if there is any problem with your edgebanding machines, or if you want to upgrade them, then you should go for accessories that are available in the market. You can go for a power clamp which is used for holding a non-porous work piece or an end cutter which is used for perfectly cutting out the left out part of the band that is applied on the work piece. If you are concerned about carrying your edge bander to other places then you should also go fora edge banding container which is provided by many companies.

It is always better to know about the type of Edgebanding machines so that you always have the choice to choose any one of your type. Though there are many types of them, these are the main ones. So choose wisely and reap the benefits.

Why Do You Need a Compressor?

You must ask this question when you want to buy a compressor. Here, you should read this explanation the get more to know about it and its usage.

A compressor is a versatile tool that can perform a variety of tasks when attached to some tools, also known as pneumatic tools. You can use it for maintenance and craft projects around the house, repair jobs in the garage, construction projects on the job site, or industrial projects in the shop. Using pneumatic nail guns, hammers, spray guns, wrenches, drills, sprayers, sanders, saws, tire inflators, and many other air tools, you can pump up tires, paint a fence, build a deck, repair your truck or car, roof your home, or remodel your house.

Compressors are available in a wide array of sizes and styles. Choosing the one that’s right for you is really a matter of how it will be used and personal preference. Ask yourself before going any further. The type of them that you need will depend on some factors, especially which tools your will want your compressor to operate. 

• A twin-stack style provides maximum portability and is ideal for roofing, remodeling, car maintenance, and clean-up, with a low-profile for added stability on uneven surfaces. Most of these are electric powered, so you can operate them indoors or out.
• A pancake style is lightweight and portable and great for locations where you might be concerned about your space limitations. It is ideal for building, inflation, crafts, and outdoor clean-up. Most of these are electric powered, so you can operate them indoors or out.
• A wheelbarrow style provides easy maneuvering and mobility for building and maintenance jobsites with wheels. Most of these are gasoline powered, so you will only want to operate them in well-ventilated areas and where noise is not a problem.

In general, casual or moderate-level work such as tire inflation, nailing, and stapling projects, or craft projects such as upholstery or air brushing are the type of tasks that require a highly-portable one, such as some products of Atlas Copco Compressor, which is easy to carry around the house or the garage. These types of residential projects generally only require machine with tanks that are less than 5 gallons.

For more heavy-duty projects like auto repair, removing lug nuts, or remodeling projects that involve sanding, drilling, or using spray guns, look for a compressor with a tank over 5 gallons.

Your need of compressor also can be based to four rates as mentioned below:

PSI – Pounds per Square Inch: This is the measure of air pressure delivered by your machine. The higher the PSI, the further the air can be compressed - meaning a larger volume of compressed air can be stored in the tank.

CFM – Cubic Feet per Minute: This is the volume of air that your machine can pump in one minute a specific working pressure. High CRM ratings mean it can provide more air – making higher CFM units more practical for larger applications.

HP – Horsepower: This is the unit of measurement for the power your compressor’s motor produces. Higher horsepower engines produce greater PSI and are capable of carrying a heavier workload.

Tank Size: Units with more powerful motors and larger tanks (measured in gallons) can generate higher levels of PSI for longer amounts of time, providing greater power to your air tools.

Back to the above question, why do you need one? Do you need best product, like Atlas Copco Compressor, or do you need an average one? It is all back to you. Ensure that your research is solid and not lacking in any aspect.